Pure-Sinewave-Inverter-Chargers

AA Solar
4 Blue Gum Avenue
SILVERDALE, AUCKLAND 0932
NEW ZEALAND

Phone: 09 427 4040 or 09 427 4143
Fax: 09 427 4040
Cell: 0274 905 901
Email: sales@aasolar.co.nz
Web: www.aasolar.co.nz

Home

Products

Prices

Frequently Asked Questions

SunPowerPlus Webpage

SunPowerPlus TradeMe Site

Pure Sinewave Inverters
and
Inverter/Chargers

HPC Series Inverter/Chargers	XPC Series Inverter/Chargers	AJ Series Inverters	SI Series Inverters
C Series Inverter/Chargers		XTH Series Inverter/Charger/Extender

HP-COMPACT
Sinewave
Inverter-Charger

Models available:-

HPC 2800-12

2500 watt continuous 12V

HPC 4400-24
4000 watt continuous 24V

HPC 8000-48
7000 watt continuous 48V

The Studer HP-Compact Pure sinewave inverter/charger can be used in houses, motor homes, and boats, and can be used for running a wide selection of appliances, including washing machines, fridges, computers, televisions, toasters, kettles, pumps, power tools, and lights.

The HP Compact Inverter-Charger units offer 3 fully automatic functions:-

Pure Sinewave Inverter
Battery Charger
Transfer System

The series offers the following features:-

True sinewave output runs all appliances
High surge ratings suitable for motors and pumps
Comprehensive LED display
Four stage battery charger
Power Factor Corrected battery charging
Intelligent AC transfer switch
Adjustable power sharing between load and battery charging
Optional remote display for convenience
Adjustable stand-by / load detection
Fully adjustable charging parameters
Comes with battery cables
Easy wall mounting
Heavy Duty and Very Reliable

Model	HPC 2800-12	HPC 4400-24	HPC 8000-48

Inverter
Nominal Battery Voltage	12V	24V	48V
Input Voltage Range	9.5 - 17 V	19 - 34 V	38 - 68 V
Continuous Power @ 25°C	2500VA	4000VA	7000VA
Power 30 min @ 25°C	2800VA	4400VA	8000VA
Maximum Power Load 5 sec	3 x Pnom
Maximum Load	Up to short circuit
Maximum Asymmetric Load	Up to Pcont
Stand-By Adjustment	1 to 25 watt
Cos φ	0.1—1
Maximum Efficiency	93%	94%	96%
Consumption OFF/Stand-By/ON	1.4/1.8/10W	1.7/2/16W	2/3/30W
Output Voltage	230Vac (-10%/0)
Output Frequency Crystal Controlled	50Hz ± 0.05%
Total Harmonic Distortion	< 2%
Dynamic Behaviour on Load Change 0 to 100%	0.5 ms
Overload and short circuit protection	Automatic Disconnection with 3 time restart attempt
Overheat Protection	Acoustic warning before shut-off—with automatic restart

Battery Charger (4 STEP) I-U-Uo-Equalize (every 25 cycles)
Charging Current Adjustable	0-110A	0—100A	0—90A
Input Current Balance Adjustment (Power Sharing)	1—30A		1—50A
Maximum Input Voltage	265 Vac
Minimum Input Voltage	Adjustable Threshold from 150 to 230Vac
Input Frequency	45—65 Hz
Power Factor Correction (PFC)	EN 61000-3-2

Battery Control (thresholds and times adjustable by the user)
Absorption Time	0—4 hr
End Charge Cycle Voltage	14.4 V	28.8 V	57.6 V
Floating Voltage	13.6 V	27.2 V	54.4 V
Equalization Voltage	15.6 V	31.2 V	62.4 V
Deep-Discharge Protection	10.8 V	21.6 V	43.2 V
Temperature Compensation (optional CT-35)	-3mV / ° C / cell

General Data
Multifunction Contact—Potential Free (3 points)	16A—250 Vac
Max. Current on Transfer Relay	30A/6.9kVA		50A/11.5kVA
Transfer Time	< 20 ms
Weight	33kg	39kg	45kg
Dimension: D x W x H (mm)	242 x 288 x 480	242 x 288 x 480	242 x 288 x 500
Protection Index IP20	IP23
EC Conformity	EN61000-6-1, EN61000-6-3, EN55014,EN55022,EN61000-3-2 Dir. 89/336/EEC, LVD 73/23/EEC
Operating Temperature Range	-20 to 55° C
Ventilation	From 45° C
Acoustic Level Without / With Ventilation	< 10dB / < 35dB
Warranty	2 years

Data subject to change without prior notice

Accessories
ARM-01	Auxilliary Relay Module
CT-35	Temperature Sensor
RCC-01	Remote Controller c/w 20m cable
RPS 01	Remote Power Sharing

Top of Page

Back to Home Page

XP-COMPACT

Sinewave
Inverter-Charger

Models available:-

XPC 1400-12

1100 watt continuous 12V

XPC 2200-24
1600 watt continuous 24V

The Studer XP-Compact Pure sinewave inverter/charger can be used in houses, motor homes, and boats, and can be used for running a wide selection of appliances, including washing machines, fridges, computers, televisions, toasters, kettles, pumps, power tools, and lights.

The XP COMPACT series consist of fully automatic pure sine wave inverters with battery chargers and transfersystems.

the inverter converts the battery voltage to 230Vac AC voltage
the high power charger supplies charge current to the battery
the automatic transfersystem manages the available power

The XP COMPACT benefits from our "one step ahead" technology in the field of inverters.

THE XP COMPACT SERIES OFFER:

a high and steady efficiency
an outstanding overload capability, thanks to the combined use of a toroidal transformer and an oversized MOS power stage
an ultra-fast regulation and microprocessor control
an electrical supply to any kind of appliance
a fast transfer relay
a 4 STAGE (I/U/Uo/equalizing) battery charger with Power Factor Correction (PFC)
a potential free contact for alarm purpose if the remote control is not used (default settings)
and programmable with the optional remote control RCC-01
a complete internal protection of the XP COMPACT (overload, overheat, short-circuit, reverse polarity)
an stand-by level adjustable on a large range from a very low load detection
no noise thanks to HF-switching > 20kHz
battery cables mounted
easy wall mounting by 4 external screws

Model	XPC 1400-12	XPC 2200-24

Inverter
Nominal Battery Voltage	12V	24V
Input Voltage Range	9.5 - 16 V	19 - 32 V
Continuous Power @ 25°C	1100VA	1600VA
Power 30 min @ 25°C	1400VA	2200VA
Maximum Power Load 5 sec	3 x Pnom
Maximum Load	Up to short circuit
Maximum Asymmetric Load	Up to Pcont
Stand-By Adjustment	1 to 25 watt
Cos φ	0.1—1
Maximum Efficiency	94%	95%
Consumption OFF/Stand-By/ON	0.5/0.6/4W	0.8/0.9/7W
Output Voltage	230Vac (-10%/0)
Output Frequency Crystal Controlled	50Hz ± 0.05%
Total Harmonic Distortion	< 4%	< 2%
Dynamic Behaviour on Load Change 0 to 100%	0.5 ms
Overload and short circuit protection	Automatic Disconnection with 3 time restart attempt
Overheat Protection	Acoustic warning before shut-off—with automatic restart

Battery Charger (4 STEP) I-U-Uo-Equalize (every 25 cycles)
Charging Current Adjustable	0-45A	0—37A
Input Current Balance Adjustment (Power Sharing)	n.a.
Maximum Input Voltage	265 Vac
Minimum Input Voltage	Adjustable Threshold from 150 to 230Vac
Input Frequency	45—65 Hz
Power Factor Correction (PFC)	EN 61000-3-2

Battery Control (thresholds and times adjustable by the user)
Absorption Time	0—4 hr
End Charge Cycle Voltage	14.4 V	28.8 V
Floating Voltage	13.6 V	27.2 V
Equalization Voltage	15.6 V	31.2 V
Deep-Discharge Protection	10.8 V	21.6 V
Temperature Compensation (optional CT-35)	-3mV / ° C / cell

General Data
Multifunction Contact—Potential Free (3 points)	16A—250 Vac
Max. Current on Transfer Relay	16A/3.7kVA
Transfer Time	< 20 ms
Weight	11.7kg	12.6kg
Dimension: D x W x H (mm)	124 x 215 x 410	124 x 215 x 410
Protection Index IP20	IP23 with top cover C-IP23
EC Conformity	EN61000-6-1, EN61000-6-3, EN55014,EN55022,EN61000-3-2 Dir. 89/336/EEC, LVD 73/23/EEC
Operating Temperature Range	-20 to 55° C
Ventilation	From 45° C
Acoustic Level Without / With Ventilation	< 10dB / < 35dB
Warranty	2 years

Data subject to change without prior notice

Accessories
ARM-01	Auxilliary Relay Module
CT-35	Temperature Sensor
RCC-01	Remote Controller c/w 20m cable

Top of Page

Back to Home Page

AJ Series

Sinewave Inverters

Models available:-

AJ275-12

200 watt continuous 12V

AJ350-24
       300 watt continuous      24V
AJ500-12
       400 watt continuous      12V
AJ600-24
       500 watt continuous      24V
AJ1000-12
       800 watt continuous      12V
AJ1300-24
       1100 watt continuous     24V
AJ2100-12
       2000 watt continuous    12V
AJ2400-24
       2000 watt continuous    24V

The AJ series offer:

a range from 200 to 2000VA continuous

high efficiency

an outstanding overload capacity, thanks to the combined use of a toroidal transformer and a MOS power stage

digital regulation and microprocessor controlled

an AC electrical supply to any kind of electrical device

a complete internal protection of the inverter (overload, over temperature, short-circuit and reverse polarity)

an adjustable stand-by level on a large range and from a very low level (optional for AJ 275-12 and 350-24)

All the AJs in 12V and 24 V are certified according to the EC norm ECE-R 10 (E24)

Battery and output cables mounted

Easy wall mounting by 4 external screws

Model	AJ275-12	AJ350-24	AJ500-12	AJ600-24	AJ1000-12	AJ1300-24	AJ2100-12	AJ2400-24

Battery Voltage (V)	12	24	12	24	12	24	12	24
Input Voltage (V)	10.5 - 16	21 - 32	10.5 - 16	21 - 32	10.5 - 16	21 - 32	10.5 - 16	21 - 32
Power: continuous (VA)	200	300	400	500	800	1000	2000	2000
Power: 30 mins (VA)	275	350	500	600	1000	1300	2100	2400
Stand-by/ON no load (W)	0.3/1.9	0.3/3.3	0.3/3.8	0.4/8.5	0.3/9	0.4/10	0.5/13	0.4/18
Max efficiency (%)	93	94	93	94	93	94	92	94
Dimensions: 142 x 84 x L (mm)	163		240		428		276 x 399 x 117
Weight (kg)	2.4	2.6	4.5		8.5		19	18
Remote Control ability	Option				Yes
Load Detection Standy-By	No		Yes
Protection index	IP30						IP20

Data subject to change without prior notice

	Remote Control JT 8 for 800 to 2000 watt models

Top of Page

Back to Home Page

SI Series
Sinewave Inverters

Models available:-

SI1212TP
    1200 watt continuous 12VDC
       with TwinPower option

SI3324TP
     3300 watt continuous   24VDC
       with Twinpower option

The SI series offer::-

a high and steady efficiency
an outstanding overload capability, thanks to the combined use of a toroidal transformer and a MOS power stage
an ultra-fast regulation
an electrical supply to any kind of device
a complete internal protection of the SI (overload, overheat, short-circuit, reverse polarity)
a stand-by level adjustable on a large range and from a low threshold on
no noise thanks to HF-switching > 20 kHz
the possibility to assemble 3 inverters (min. SI 1200) in a 3-phased 3 x 400V stand-alone grid
Twinpower option available, which enables the permanent use of very small loads (like alarms and security systems) with outstanding efficiency

Model	SI 1212TP	SI 3324TP

Battery Voltage (V)	12	24
Power: continuous (VA)	1200	3300
<<Stand-by>> current mA Power << ON >> no load (W)	25 4.8	25 13
Power << ON >> no load (W) TWINPOWER system	< 0.5	< 0.7
Max efficiency (%)	93 - 95	95
Dimensions: (mm)	391L x 124H x 215W	636L x 124H x 215W
Weight (kg)	13.2	30

Input Voltage	Min - Max: < Unom x 0.95 to Unom x 1.33
Dynamic correction of Umin	- 10% at Pnom
Output voltage	True sine 230VAC ± 3%
Distortion	< 2% at Pnom
Dynamic behaviour	From 0% to 100% load change. Normalization: 0.5 ms
Frequency	50 Hz ± 0.01% (Crystal control)
Load detection (stand-by)	Adjustable: 0.3 - 20W
Maximum power 15 min	1.3 - 1.6 x Pnom / 25°C
Maximum power 3 min	1.6 - 2 x Pnom / 25°C
Peak power 5 sec	3.5 x Pnom
Asymmetric load	Up to 2 x Pnom
Cos $φ$	0.1 - 1
Protections	Overload/Overheat/Short-circuit/Reverse polarity by internal fuse
IP protection index	IP20 complies with DIN 40050/IP 23 with top cover C-IP23
Forced ventillation	From 45°C ± 3°C
Overheating protection	75°C ± 3°C
Required battery capacity	> 5 x Pnom/Unom (recommended value)
Acoustic level	With ventilation: < 10 dB Without ventilation: < 35 dB
EC conformity	EN61000-6-1, EN61000-6-3, EN55014, EN55022, EN61000-3-2, Dir. 89/336/EEC, LVD 73/23/EEC
Data subject to change without prior notice

Top of Page

Back to Home Page

C-Series
Sinewave
Inverter-Charger

Models available:-

C1600-12

1300 watt continuous 12V

C2600-24
2300 watt continuous 24V

The Studer C Compact Pure sinewave inverter/chargers can be used in houses, motor homes, and boats, and can be used for running a wide selection of appliances, including washing machines, fridges, computers, televisions, toasters, kettles, pumps, power tools, and lights.

The C Compact Inverter-Charger units offer 3 fully automatic functions:-

Pure Sinewave Inverter
Battery Charger
Transfer System

The series offers the following features:-

True sinewave output runs all appliances
High surge ratings suitable for motors and pumps
Comprehensive LED display
Four stage battery charger
Power Factor Corrected battery charging
Intelligent AC transfer switch
Adjustable power sharing between load and battery charging
Optional remote display for convenience
Adjustable stand-by / load detection
Fully adjustable charging parameters
Comes with battery cables
Easy wall mounting
Heavy Duty and Very Reliable

Model	C1600-12	C2600-24

Inverter
Nominal Battery Voltage	12V	24V
Input Voltage Range	9.5 - 16 V	19 - 32 V
Continuous Power @ 25°C	1300VA	2300VA
Power 30 min @ 25°C	1600VA	2600VA
Maximum Power Load 5 sec	3 x Pnom
Maximum Load	Up to short circuit
Maximum Asymmetric Load	Up to Pcont
Stand-By Adjustment	1 to 25 watt
Cos φ	0.1—1
Maximum Efficiency	94%	95%
Consumption OFF/Stand-By/ON	0.5/0.6/6W	0.8/0.9/9W
Output Voltage	230Vac (-10%/0)
Output Frequency Crystal Controlled	50Hz ± 0.05%
Total Harmonic Distortion	< 2%
Dynamic Behaviour on Load Change 0 to 100%	0.5 ms
Overload and short circuit protection	Automatic Disconnection with 3 time restart attempt
Overheat Protection	Acoustic warning before shut-off—with automatic restart

Battery Charger (4 STEP) I-U-Uo-Equalize (every 25 cycles)
Charging Current Adjustable	0-55A	0—55A
Input Current Balance Adjustment (Power Sharing)	1—16A
Maximum Input Voltage	265 Vac
Minimum Input Voltage	Adjustable Threshold from 150 to 230Vac
Input Frequency	45—65 Hz
Power Factor Correction (PFC)	EN 61000-3-2

Battery Control (thresholds and times adjustable by the user)
Absorption Time	0—4 hr
End Charge Cycle Voltage	14.4 V	28.8 V
Floating Voltage	13.6 V	27.2 V
Equalization Voltage	15.6 V	31.2 V
Deep-Discharge Protection	10.8 V	21.6 V
Temperature Compensation (optional CT-35)	-3mV / ° C / cell

General Data
Multifunction Contact—Potential Free (3 points)	16A—250 Vac
Max. Current on Transfer Relay	16A/3.7kVA
Transfer Time	< 40 ms
Weight	16kg	17.1kg
Dimension: D x W x H (mm)	124 x 215 x 480
Protection Index IP20	IP20 (IP23 with top cover C-IP23)
EC Conformity	EN61000-6-1, EN61000-6-3, EN55014,EN55022,EN61000-3-2 Dir. 89/336/EEC, LVD 73/23/EEC
Operating Temperature Range	-20 to 55° C
Ventilation	From 45° C
Acoustic Level Without / With Ventilation	< 10dB / < 35dB
Warranty	2 years

Data subject to change without prior notice

Accessories
ARM-01	Auxilliary Relay Module
CT-35	Temperature Sensor
RCC-01	Remote Controller c/w 20m cable
RPS 01	Remote Power Sharing

Top of Page

Back to Home Page

Xtender series
Sinewave
Inverter-Charger

Models available:-

XTH3000-12
     2500 watts continuous    12VDC

XTH5000-24
     4000 watts continuous     24VDC

XTH8000-48
     7000 watts continuous    48VDC

The Xtender serie provides an unmatched freedom of use thanks to its many functions. In a basic application, it offers together the functions of inverter, battery charger, transfer system and assistance to the source. These functions can be combined and controlled in a totally automatic way for an exceptional comfort and an optimal management of the energy available.

Its programmable auxiliary contacts allow as well the interconnection with existing systems or the implementation of extended functions. Fully programmable by means of its remote control, it enables the update of the software, thus making it an upgradeable product to which new functions may be added further on. By the implementation of several units, it is possible to create a 3-phase source or to set them in parallel to increase the power available. Up to 9 inverters of the Xtender serie shall therefore be combined together.

Features:

True sine wave voltage.
Reliable and silent with any kind of load.
Outstanding overload capabilities.
Function Smart-Boost for assistance to the source even with difficult loads.
Automatic reduction of peak loads (power shaving).
Automatic allocation of the power available (power sharing).
Stand-by level adjustable over a large range and from a very low threshold.
Multi-stage programmable battery charger with PFC.
Ultra-fast transfer relay.
High efficiency.
Control by digital signal processors (DSP).

Model	XTH3000-12	XTH5000-24	XTH8000-48

Inverter
Nominal Battery Voltage	12	24	48
Input voltage range V	9.5 - 17	19 - 34	38 - 68
Continuous Power @ 25° C	2500 VA	4000 VA	7000 VA
Power Smart-Boost	2500 VA	4000 VA	7000 VA
Power 30 min @ 25° C	3000 VA	5000 VA	8000 VA
Power 5 sec @ 25° C	3 x Pnom
Maximum Load	Up to short circuit
Maximum asymmetric load	Up to Pcont.
Load Detection (stand-by)	2 to 25 W
Cos φ	0.1 - 1
Maximum Efficiency	93 %	94%	96%
Consumption OFF/Stand-by/ON	1.7W / 2.2W / 14W	1.8W / 2.5W / 20W	2.2W / 3W / 34W
Output Voltage	Sine Wave 230Vac (+0/- 10%) / 190-245 Vac
Output Frequency	50 Hz adjustable 45 - 65 Hz ± 0.05% (crystal controlled)
Harmonic Distortion	< 2%
Dynamic Behaviour	0.5 ms (on load change 0 to 100%)
Overload and Short Circuit Protection	Automatic disconection with 3 time restart attempt
Overheat Protection	Warning before Shut-off with Automatic Restart

Battery Charger 6 Step Adjustable: I-U-Uo-Equalize-Uo(low)-U(periodic)
Charging Current Adjustable	0 - 160 A	0 - 140 A	0 - 120 A
Input Current Balance Adjustment	1 - 30 A		1 - 50 A
Maximum Input Voltage	265 Vac
Input AC Voltage Range	Adjustable threshold from 150 to 230 Vac
Input Frequency	45 - 65 Hz
Power Factor Correction (PFC)	EN61000-3-2
Detection of Short-Circuited Battery Cell	√	√	√

Battery Control
Absorption end	By duration 4 / 0.25 10 h or by current / 4 - 30 A
Absorption Voltage	14.4 / 9.5 - 18 V	28.8 / 19 - 36 V	57.6 / 38 - 72 V
Periodic Absorption Voltage	- / 9.5 - 18 V	- / 19 - 36 V	- / 38 - 72 V
Floating Voltage	13.6 / 9.5 - 18 V	27.2 / 19 - 36 V	54.4 / 38 - 72 V
Reduced Floating Voltage	- / 9.5 - 18 V	- / 19 - 36 V	- / 38 - 72 V
Equalization	Ny number of cycles (- / 1 - 100) or set interval (- / 52 weeks)
Equalization end	By duration 4 / 0.25 - 10h or by current - / 4 - 30 A
Equalization Voltage	- / 9.5 - 18 V	-/19-36 V	- / 38 - 72 V
Deep-Discharge Protection	10.8 / 9.5 - 18 V	21.6 / 19 - 36 V	43.2 / 38 - 72 V
Reduced Floating Time	- / 0 - 32 days
Periodic Absorption Time	- / 0 - 10 hours
Temperature Compensation (optional BTS-01)	-5 / 0 to -8mV/ ° C / cell

General Data
Multifunction Contact Adjustable	2 independent contacts 16A 25- Vac (potential free 3 points)
Max. current on Transfer Relay	30A / 6.9kVA		50A / 11.5kVA
Transfer Time	< 20ms
Weight	34 kg	40 kg	46 kg
Dimension H x D x L (mm)	220 x 290 x 500		220 x 310 x 500
Protection Index	IP23
Conformity	EN61000-6-1, EN61000-6-3, EN55014, EN55022, EN61000-3-2, Dir.89/336/EEC, LVD 73/23/EEC
Operating Temperature Range	-20 to 55 ° C
Ventilation	Forced from 45 ° C
Acoustic Level	< 1-dB / 35dB (without / with ventilation)
Warranty	2 years

Options
RCC-02 Remote Control and Programming Centre	√	√	√
RCC-03 Rem,ote Control and Programming Centre	√	√	√
CAB-RF45-2 Communication Cable for 3 phase and parallel operation 2m	√	√	√
BTS-01 Battery Temperature Sensor 3m	√	√	√

Data subject to change without prior notice

Accessories
RCC-02	Remote Control and Programming Centre
RCC-03	Remote Control and Programming Centre
CAB-RJ45-5	Communications Cable for use with RCC-02 and RCC-03 5m cable
CAB-RJ45-20	Communications Cable for use with RCC-02 and RCC-03 20m cable

Top of Page

Home

Products

Prices

Frequently Asked Questions

SunPowerPlus Webpage

SunPowerPlus TradeMe Site

updated May 2010