AA Solar - Studer Pure Sinewave Inverter-Chargers


					AA Solar 34A Forge Road Silverdale Auckland 0932 New Zealand Phone: 09 427 4040 or 09 427 4143 Fax: 09 427 4040 Mobile: 027 490 5901 Email: sales@aasolar.co.nz

Home

Products

Prices

FAQ's

Specials

SunPowerPlus Website

SunPowerPlus Trade Me Site


S T U D E R P U R E S I N E W A V E I N V E R T E R - C H A R G E R S

C Series Pure Sinewave Inverter-Chargers

HPC Series Pure Sinewave Inverter-Chargers

XPC Series Pure Sinewave Inverter-Chargers

XTH Series Pure Sinewave Inverter-Charger-Xtenders

XTM Series Pure Sinewave Inverter-Charger-Xtenders

Accessories

C Series Pure Sinewave Inverter-Chargers

The Studer C Compact Pure sine wave Inverter-Chargers can be used in houses, motor homes, and boats,
and can be used for running a wide selection of appliances, including washing machines, fridges, computers,
televisions, toasters, kettles, pumps, power tools and lights

The C Compact Inverter-Charger units offer 3 fully automatic functions:
Pure Sinewave Inverter
Battery Charger
Transfer System

The series offer the following features:

True sine wave output runs all appliances
High surge ratings suitable for motors and pumps
Comprehensive LED display
Four stage battery charger
Power Factor Corrected battery charging
Intelligent AC transfer switch
Adjustable power sharing between load and battery charging
Optional remote display for convenience
Adjustable stand-by / load detection
Fully adjustable charging parameters
Comes with battery cables
Easy wall mounting
Heavy duty and very reliable

Click here for pricing

Model	C1600-12	C2600-24
Inverter
Nominal battery voltage	12V	24V
Input voltage range	9.5-16VDC	19-32VDC
Continuous power @ 25°C	1300VA	2300VA
Power 30 min @ 25°C	1600VA	2600VA
Power 5 sec @ 25°C	3900VA	6900VA
Maximum power	Up to short circuit
Stand-by adjustment	1 to 25W
Maximum efficiency	94%	95%
Consumption: OFF Stand-by ON	0.5W 0.6W 6W	08.W 0.9W 9W
Output voltage	Sinewave 230VAC (+0%/-10%)
Output frequency	50Hz ± 0.05% (crystal controlled)
Overload and short-circuit protection	Automatic disconnection with 3 time restart attempt
Overheat protection	Acoustic warning before shut-off with automatic restart
Battery charger (4 step)
Charging current adjustable	0 - 55A
Maximum input voltage	265 VAC
Input AC voltage range	Adjustable threshold from 150 to 230VAC
Input frequency	45 - 65 Hz
Absorption time	0 - 4 hours
Floating voltage	13.6V	27.2V
Equalisation time	0 - 4 hours
Equalisation voltage	15.6V	31.2V
Deep-discharge protection	10.8V	21.6V
General data
Weight	16kg	17.1kg
Dimensions (L x W x H)	124 x 215 x 480 mm
Operating temperature range	-20°C up to +55°C
Relative humidity in operation	From 45°C
Acoustic level	<40dB without ventilation / <45dB with ventilation

Click here for a downloadable PDF of this information

Accessories available for the C Series:

ARM-01 Auxiliary Relay Module
CT-35 Temperature Sensor
RCC-01 Remote Control
RPS-01 Remote Power Sharing

HPC Series Pure Sinewave Inverter-Chargers

The Studer HP-Compact Pure sine wave Inverter-Chargers can be used in houses, motor homes and boats,
and can be used for running a wide selection of appliances including washing machines, fridges,
computers, televisions, toasters, kettles, pumps, power tools and lights

The HP-Compact Inverter-Charger units offer 3 fully automatic functions:
Pure Sinewave Inverter
Battery Charger
Transfer System

The series offers the following features:

True sine wave output runs all appliances
High surge rating suitable for motors and pumps
Comprehensive LED display
Four stage battery charger
Power Factor Corrected battery charging
Intelligent AC transfer switch
Adjustable power sharing between load and battery charging
Optional remote display for convenience
Adjustable stand-by / load detection
Fully adjustable charging parameters
Comes with battery cables
Easy wall mounting
Heavy duty and very reliable

Click here for pricing

Model	HPC2800-12	HPC4400-24	HPC8000-48
Inverter
Nominal battery voltage	12V	24V	48V
Input voltage range	9.5-17VDC	19-34VDC	36-68VDC
Continuous power @ 25°C	2500VA	4000VA	7000VA
Power 30 min @ 25°C	2800VA	4400VA	8000VA
Power 5 sec @ 25°C	7500VA	1200VA	21000VA
Maximum efficiency	93%	94%	96%
Consumption: - OFF - Stand-by - ON	1.4W 1.8W 10W	1.7W 2W 16W	2W 3W 30W
Output voltage	Sinewave 230VAC (+0 / -10%)
Output frequency	50Hz ±0.05% (crystal controlled)
Overload and short circuit protection	Automatic disconnection with 3 time restart attempt
Overheat protection	Acoustic warning before shut-off with automatic restart
Battery Charger
Charging current adjustable	0-100A	0-100A	0-90A
Input AC voltage range	Adjustable threshold from 150 to 230 VAC
Input frequency	45 - 65 Hz
Absorption time	0 - 4 Hour
Floating voltage	13.6V	27.2V	54.4V
Equalisation time	0 - 4 Hour
Equalisation voltage	15.6V	31.2V	62.4V
Deep-discharge protection	10.8V	21.6V	43.2V
General Data
Weight	33kg	39kg	45kg
Dimensions (H x W x L)	242 x 288 x 480 mm		242 x 288 x 500 mm
Operating temperature range	-20°C up to +55°C
Acoustic level	<40dB without ventilation / <45dB with ventilation

Click here for a downloadable PDF of this information

Accessories available for the HPC Series:

ARM-01 Auxiliary Relay Module
CT-35 Temperature Sensor
RCC-01 Remote Control
RPS-01 Remote Power Sharing

XPC Series Pure Sinewave Inverter-Chargers

The Studer XP-Compact Pure sine wave Inverter-Charger can be used in houses, motor homes and boats,
and can be used for running a wide selection of appliances including washing machines, fridges, computers, televisions, toasters, kettles, pumps, power tools and lights

The XP-Compact series consist of fully automatic pure sine wave inverters with battery chargers and transfer systems:
The inverter converts the battery voltage to 230VAC
The high power charger supplies charge current to the battery
The automatic transfer system manages the available power

The XP-Compact benefits from out "one step ahead" technology in the field of inverters

The XP-Compact series offer:

A high and steady efficiency
An outstanding overload capability, thanks to the combined use of a toroidal transformer and an oversized MOS power stage
An ultra-fast regulation and microprocessor control
An electrical supply to any kind of appliance
A fast transfer relay
A 4-stage battery charger with Power Factor Correction (PFC)
A potential free contact for alarm purpose if remote control is not used and programmable with the optional remote control RCC-01
A complete internal protection of the XP-Compact (overload, overheat, short-circuit, reverse polarity)
A stand-by level adjustable on a large range from a very low load detection
No noise thanks to HF-switching > 20kHz
Battery cables mounted
Easy wall mounting by 4 external screws

Click here for pricing

Model	XPC1400-12	XPC2200-24
Inverter
Nominal battery voltage	12V	24V
Input voltage range	9.5-16VDC	19-32VDC
Continuous power @ 25°C	1100VA	1600VA
Power 30 min @ 25°C	1400VA	2200VA
Power 5 sec @ 25°C	3300VA	4800VA
Maximum efficiency	94%	95%
Consumption: - OFF - Stand-by - ON	0.5W 0.6W 4W	0.8W 0.9W 7W
Output voltage	Sinewave 230VAC (+0% / -10%)
Output frequency	50Hz ±0.05% (crystal controlled)
Battery Charger
Charging current adjustable	0-45A	0.37A
Input AC voltage range	Adjustable threshold from 150 to 230VAC
Input frequency	45-65Hz
Absorption time	0 - 4 hours
Floating voltage	13.6V	27.2V
Equalisation time	0 - 4 hours
Equalisation voltage	15.6V	31.2V
Deep-discharge protection	10.8V	21.6V
General Data
Weight	11.7kg	12.6kg
Dimensions (H x W x L)	124 x 215 x 410 mm
Operating temperature range	-20°C up to +55°C
Acoustic level	< 40dB without ventilation / < 45dB with ventilation

Click here for a downloadable PDF of this information

Accessories available for the XPC Series:

ARM-01 Auxiliary Relay Module
CT-35 Temperature Sensor
RCC-01 Remote Control

XTH Series Pure Sinewave Inverter-Chargers-Xtender

The Xtender series provide an unmatched freedom of use thanks to its many functions. In a basic application,
it offers together the functions of Inverter, Battery Charger, Transfer System and assistance to the source.
These functions can be combined and controlled in a totally automatic way for an exceptional comfort and an optimal
management of the energy available

Its programmable auxiliary contacts allow as well the interconnection with existing systems, or the implementation
of extended functions. Fully programmable by means of its remote control, it enables the update of the software,
thus making it an upgradeable product to which new functions may be added further on. By the implementation of several
units, it is possible to create a 3-phase source or to set them in parallel to increase the power available. Up to 9 inverters
of the Xtender series can be combined together

Features:

True sine wave voltage
Reliable and silent with any kind of load
Outstanding overload capabilities
Function Smart-Boost for assistance to the source, even with difficult loads
Automatic reduction of peak loads (power saving)
Automatic allocation of the power available (power sharing)
Stand-by level adjustable over a large range and from a very low threshold
Multi-stage programmable battery charger with PFC
Ultra-fast transfer relay
High efficiency
Control by digital signal processors (DSP)

Click here for pricing

Model	XTH3000-12	XTH5000-24	XTH8000-48
Inverter
Nominal battery voltage	12V	24V	48V
Input voltage range	9.5-17VDC	19-34VDC	38-68VDC
Continuous power @ 25°C	2500VA	4500VA	7000VA
Power 30 min @ 25°C	3000VA	5000VA	8000VA
Power 5 sec @ 25°C	7500VA	12000VA	21000VA
Maximum efficiency	93%	94%	96%
Consumption: - OFF - Stand-by - ON	1.2W 1.4W 14W	1.4W 1.8W 18W	1.8W 2.4W 30W
Output voltage	Pure sine wave 230VAC ± 2%
Output frequency	50 Hz ± 0.05% (crystal controlled)
Overload and short circuit protection	Automatic disconnection with 3 time restart attempt
Overheat protection	Warning before shut-off with automatic restart
Battery Charger
Charge characteristic	6 step: BULK-ABSORPTION-FLOATING-EQUALISATION -REDUCED FLOATING-PERIODIC ABSORPTION Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03
Maximum charging current	160A	140A	120A
General Data
Input voltage range	150 to 265 VAC
Input frequency	45 to 65 Hz
Weight	34kg	40kg	46kg
Dimension (H x W x L)	230 x 300 x 500 mm	230 x 300 x 500 mm	230 x 300 x 500 mm
Operating temperature	-20 to +55°C
Acoustic level	< 40 dB without ventilation / < 45 dB with ventilation

Click here for a downloadable PDF of this information

Accessories available for the XTH Series:

BTS-01 Temperature Sensor
RCC-02 Remote Control
RCC-03 Remote Control
CAB-RJ45-5,-20,-50 Communication Cable for RCC-02,-03
BSP-500 Battery Status Processor

XTM Series Pure Sinewave Inverter-Chargers

The Xtender series provides an unmatched freedom of use due to its many functions. In a basic application,
it offers a total package: the functions of Inverter, Battery Charger, Transfer System and Assistance to the source.
These functions can be combined and controlled in a totally automatic way for exceptional ease and optimal
management of available energy

Its programmable auxiliary contacts also permit interconnection with existing systems or the implementation of
extended functions. Fully programmable by means of its remote control, it enables the software update;
thus making it an upgradeable product to which new functions may be added further on. Through the implementation
of several units, it is possible to create a 3-phase source or to set them in parallel, in order to increase the power available.
Up to 9 Xtender series inverters can then be combined together

Features:

True sine wave voltage
Reliable and silent with any kind of load
Outstanding overload capabilities
Smart-Boost function for assistance to the source even with difficult loads
Automatic reduction of peak loads (power saving)
Multi-stage programmable battery charge with (PFC)
Stand-by level adjustable over a large range and from a very low threshold
Ultra-fast transfer relay
Control by digital signal processors (DSP)
High efficiency

Click here for pricing

Model	XTM1500-12	XTM2000-12	XTM2400-24	XTM3500-24	XTM4000-48
Inverter
Nominal battery voltage	12V		24V		48V
Input voltage range	9.5-17VDC		19-34VDC		38-68VDC
Continuous power @ 25°C	1500VA	2000VA		3000VA	3500VA
Power 30 min @ 25°C	1500VA	2000VA	2400VA	3500VA	4000VA
Power 5 sec @ 25°C	3400VA	4800VA	6000VA	9000VA	10500VA
Maximum efficiency	93%		94%		96%
Consumption: - OFF - Stand-by - ON	1.2W 1.4W 8W	1.2W 1.4W 10W	1.4W 1.6W 9W	1.4W 1.6W 12W	1.8W 2.1W 14W
Output voltage	Pure sine wave 230VAC ± 2%
Output frequency	50 Hz ± 0.05% (crystal controlled)
Overload and short circuit protection	Automatic disconnection with 3 time restart attempt
Overheat protection	Warning before shut-off with automatic restart
Battery Charger
Charge characteristic	6 step: BULK-ABSORPTION-FLOATING-EQUALISATION -REDUCED FLOATING-PERIODIC ABSORPTION Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03
Maximum charging current	70A	100A	55A	90A	50A
General Data
Input voltage range	150 to 265 VAC
Input frequency	45 to 65 Hz
Weight	15kg	18.5kg	16.5kg	21.2kg	22.9kg
Dimension (H x W x L)	133 x 322 x 466 mm
Operating temperature	-20 to +55°C
Acoustic level	< 40 dB without ventilation / < 45 dB with ventilation

Click here for a downloadable PDF of this information

Accessories available for the XTM Series:

BTS-01 Temperature Sensor
RCC-02 Remote Control
RCC-03 Remote Control
CAB-RJ45-5,-20,-50 Communication Cable for RCC-02,-03
RCM-10 Remote Command Module
BSP-500 Battery Status Processor

Accessories

Part	For model/s	Description
ARM-01	C HPC XPC	Equipped with 3 programmed relays and a fourth one which is like the inverter-charger's auxiliary contact, this module allows the Solsafe system to be implemented
BTS-01	XTH XTM	This sensor enables your inverter to accurately adapt the charge thresholds to the battery temperature Dimensions (H x L x W) : 58 x 51.5 x 22 mm Supplied with 5m cable
CT-35	C HPC XPC	This sensor adapts charge levels to the battery's temperature variations Supplied with 3m cable
RCC-01	C HPC XPC	The RCC-01 remote control allows the user to consult, control and program* the system remotely. An LED display offers a comprehensive view of the batteries charging state and of the output current (or transfer mode input) *Remote control require for the XPC programming Programming possible for the ranges HPC, XPC and C in the Compact series Dimensions (H x L x W) : 135 x 115 x 25 mm Supplied with 20m cable
RCC-02	XTH XTM	The RCC-02 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders Thanks to its digital display, the RCC-02 provides clear and comprehensive indications on the state of the system in the chosen language The device memorises the events that occurred on an installation and therefore anticipates any future problems A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates Meant for wall mounting Dimensions (H x L x W) : 170 x 168 x 43.5 mm Supplied with 2m cable (max. 50m)
RCC-03	XTH XTM	The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language The device memorises the events that occurred on an installation and therefore anticipates any future problems A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates Meant for wall mounting Dimensions (H x L x W) : 170 x 168 x 43.5 mm Supplied with 2m cable (max. 50m)
CAB-RJ45-5 CAB-RJ45-20 CAB-RJ45-50	XTH XTM	Communication Cable for use with RCC-02 and RCC-03 5m, 20m and 50m lengths available
RCM-10	XTM	The RCM-10, optional with the XTM series, offers the following functions: - Main on/off of the inverter (achieved by connecting a potential free contact between terminals 1 and 2) - Function input (driven by a dry contact between terminals 5 and 6, with a bridge between terminals 3 and 4 or by an AC or DC voltage of max 60 Veff between terminals 4 and 5) Rail DIN mounting Dimensions (H x L x W) : 45 x 73 x 45 mm Supplied with 3m cable (length max. 5m)
BSP-500	XTH XTM	One of the most important information for a safe and effective operating of an energy system with batteries is their state of charge. The BSP offers, for Xtender systems, a highly precise measuring and an extremely efficient algorithm that calculates the state of charge in the most accurate way The remote control RCC-02/03 provides the display, the data logging, the graphical display of the state of charge history and the settings. Values of the BSP can be used in the programming of the Xtender systems. Besides, 17 different values can be displayed, for instance: - State of charge - Voltage - Current - Time to go - Throughput energy - Battery temperature The BSP is offering a voltage measuring for 12, 24 and 48V batteries and a current measuring by resistive shunt The BSP-500 has a 500A shunt Dimensions (H x L x W) : 110.5 x 75 x 26 mm Cable length for the battery connection: 2m Supplied with a 5m communication cable and a shunt of 500A
RPS-01	C HPC	The RPS-01 allows the inverter-charger input current to be adjusted remotely For C and HPC in the Compact series Dimensions (H x L x W) : 135 x 115 x 25 mm Supplied with 20m of cable

Updated May 2011