aa solar
 AA Solar
4 Blue Gum Avenue
SILVERDALE,  AUCKLAND 0932
NEW ZEALAND

Phone: 09 427 4040 or 09 427 4143
Fax: 09 427 4040
Cell: 0274 905 901
Email: sales@aasolar.co.nz
Web: www.aasolar.co.nz


Home Products
 Prices
 Frequently Asked Questions
 Contact Us
 SunPowerPlus Webpage
 SunPowerPlus TradeMe Site

PowerMaster Pure Sinewave Inverters 

Pure Sinewave Inverters L series
 Pure Sinewave Inverter/Chargers LC series
Pure Sinewave Inverter/Charger/Solar Regulator SSL series Pure Sinewave Stackable Inverter/Chargers SI series


Pure Sinewave Inverters
L series
 picture PM inverter

 


12 and 24 VDC


PM-150L
150 watt


PM-350L
350 watt


PM-650L
650 watt


PM-1200L
1200 watt


PM-1800L
1800 watt


PM-3000L
3000 watt
                                                                         
          

This range of pure sine wave inverters use low frequency switching with a large toroidal output transformer, to give efficiencies and surge capability much higher than other competing high frequency units - and with low standby power.

This results in lower heating of the unit and lower wasted energy from the supplying batteries.

Pure sine wave inverters generate a clean waveform just like your mains supply and are needed for delicate electrical or electronic items such as stereos, laser printers, digital clocks, rechargeable tools and all equipment with variable motor speed control such as bread makers, variable speed drills and washing machines.

FEATURES:

  • Microprocessor-based design with accurate and stable frequency
  • Outputs adjustable
  • Panel indicators for battery voltage and load level
  • Standard inputs 12V and 24V
  • Very low harmonic distortion  THD < 3%
  • Quick response standby functions
  • RS232 interface option
  • Very efficient stand-by circuit
  • Remote control unit option
  • Green power feature
  • Very reliable
  • Capable of driving inductive loads               
  • AC and DC line Filter
  • Rugged chassis for harsh environments
  • Standard low battery cut off
  • Excellent overload performance
  • Auto load sense
  • Pure sine wave at 50 Hz
  • Low installation cost
  • Very efficient
  • Easily mounted
  • Very low noise
Model
 PM150L-L
 PM350L-L
 PM650L-L
 PM1200L-L
 PM1800L-L
 PM3000L-L







Continuous Power Output
150 w 350 w 650 w 1200 w 1800 w
 3000 w
Output Power Surge
500 w
 1050 w
 1950 w
 3600 w
 5400 w
 9000 w
AC Output Voltage
200 ~ 240VAC ± 5% adjustable
200 ~ 240CAC  ±  1 ~ 2% adjustable
Output Voltage Reg.
 - 5% ~ + 5%
 - 1.5 ~ + 1.0%
Output Frequency
 50Hz / 60Hz ± 0.5%
Output Waveform
 Pure Sinewave < 4% THD
 Pure Sinewave  < 2% THD
Efficiency (Full Load)
 > 80%
No Load Power Consump
 < 5w < 4w (In Green Power status)
Input Voltage Range
 10 ~  16 VDC  /  20 ~ 32 VDC
GreenPower Recovery Time
 N/A
 1 Second
LED Status Indication
 RUN/trip LED all in one
 Power ON/OFF, RUN/STAND BY, High/Low Battery Shutdown, Over Temperature Shutdown, Overload Shutdown
Protection Features
 Input High/Low Voltage, Over Temp and Reverse Input Polarity (Fuse), Overload, Short Circuit Shutdown, Restart, Soft Start
Remote Control
 N/A
 ON / OFF Switching with 3m or 15m cable
Operating Temp  Range
 0 ~ 50 °C
Storage Temp Range
 - 30 °C  ~  70 °C
Dimensions L x W x H
220 x 130 x 90mm
 320 x 165 x 100mm
 350 x 280 x 115mm
 450 x 280 x 115mm
 375 x 280 x 185mm
 543 x 280 x 185mm
Nett Weight  - 12Volt  
2.6 kg
 4.5 kg
 10.5 kg
 17.3 kg
 22.5 kg
 34.1 kg
Nett Weight  - 24Volt  
2.6 kg
 4.5 kg
 10.5 kg
 16.9 kg
 21.3 kg
 29 kg


Top of Page
Back to Home Page


Pure Sinewave Inverter/Chargers
LC series
 PM1600LC picture

 



PM800LC-12
800 watt 12 VDC
with 40 amp charger


PM1600LC-24
1600 watt 24 VDC
with 50 amp charger


PM2400LC-24
2400 watt 24 VDC
with 50 amp charger
              
PURE SINE WAVE inverter with a built in AC Charger and LCD Display . Connect batteries and operate it as a UPS.

Features:
  • LCD display
  • Multistage charger
  • Fast Action AC Synchronized Transfer Switch
  • Microprocessor based design
  • Heat-Sink built in internal
  • Soft Start
  • AVR design
  • Input & Output isolated
  • Auto temperature control fan
  • Reverse polarity protection / by fuse / diodes /
  • Output short circuit protection
  • Temperature protection
  • Overload protection
  • Input low voltage protection
  • Input high voltage protection
  • Low battery alarm
  • Low battery shut-down

Model
 PM800LC-12
 PM1600LC-24
 PM24--LC-24




Output Power Continuous
 800 watt
 1600 watt
 2400 watt
Maximum Surge Power
 1600 watt
 3200 watt
 4800 watt
Input
Input Nominal Voltage
 220VAC
Input Voltage Range
 120VAC to 270VAC
Input Frequency
 Auto 50Hz / 60Hz (45Hz / 75Hz)
Output
Output Voltage
 220 / 230 / 240 VAC Re-settable via LCD panel
Waveform
 Pure Sine Wave
Voltage Regulation (battery Mode)
 < 3% RMS for entire battery voltage range
Output Frequency
 Adjustable 50Hz or 60Hz ± 0.1Hz
Total Harmonic Distortion
 < 3%
Maximum Load
 Up to short circuit
Overload and Short Circuit Protection
 Automatic Disconnection
Overheating Temperature Protection
 Acoustic Warning before Shut-off:  Automatic restart
Power Factor
 0.8
LCD Display
 Status, I/P & O/P Voltage Frequency, Load %, Battery Voltage & %, Temperature, Model
LED Display
 Normal - Green, Warning - Yellow, Fault - Red
Maximum Efficiency
 85 - 92%
Battery Charger
Voltage Range
 12 VDC (10-16VDC)
 24 VDC (20 - 32 VDC)
 24 VDC (20 - 32 VDC)
Input Frequency Range
 45 - 70 Hz
Max Charging Current (3 step)
 > 40 amp
 > 50 amp
 > 50 amp
General Data
Operating Temperature
 -20°C to +55°C
Maximum Current at Transfer Relay
 20A / AC 220V
 40A / AC 220V
Noise Level
 Less than 55 dBA (at 1M)_
Nett Weight
 12kg
 24 kg
 31.5 kg
Dimensions W x H x D mm
 298 x 390 x 149
 298 x 450 x 190
 298 x 450 x 190


Top of Page
Back to Home Page

Pure Sinewave
Inverter/Charger/Solar Controller
SSL series
 PM SSL series

 




PM1500SSL-12
1500 watt 12VDC
with 70 amp charger
and 40 amp solar regulator

PM1500SSL-24
1500 watt 24VDC
with 40 amp charger
and 40 amp solar regulator

PM3000SSL-12
3000 watt 12VDC
with 140 amp charger
and 40 amp solar regulator

PM3000SSL-24
3000 watt 24VDC
with 70 amp charger
and 40 amp solar regulator
              
PURE SINE WAVE Inverter with Battery Charger, Solar Charge Controller and
                   Automatic Transfer Switch ATS

Features:-
  • Uninterrupted AC power (UPS function)
  • Power Control - Dealing with limited generator or shore side power
  • Power Assist - Boosting the capacity of shore or generator power
  • LCD display for parameter setting and error messages
  • Programming auxiliary relay (x 3)
  • Optional Remote Control available



Battery Charger:-
  • Adaptive 4-stage charge characteristic: Bulk-Absorption-Float-Equalize
  • The right amount of charge: Variable Absorption Time
  • Preventing damage due to excessive gassing: The Battery Safe Mode
  • Less maintenance and aging when the battery is not in use: The Equalize Mode
  • 2 outputs to charge 2 battery banks
  • To increase battery life: Temperature Compensation
  • Battery Voltage Sense


PM SSL series Back Panel
PM SSL back panel



PM SSL series Remote
PM SSL series remote

 
MODEL NO.
12 Volt System
24 Volt System 
PM-1500SSL-12
PM-1500SSL-24
PM-3000SSL-12
PM-3000SSL-24
GENERAL
Ventilation
Forced cooling
Forced cooling
Temperature
 Operation
Storage
-20°C ~ +70°C
-25°C ~ +80°C
-20°C ~ +70°C
-25°C ~ +80°C
Protection
 
 
  a. Output short circuit
∨
∨
  b. Over load
∨
∨
  c. Battery voltage too high
∨
∨
  d. Battery voltage too low
∨
∨
  e. DC voltage ripple too high
∨
∨
  f. Temperature Sensor    
    Transformer
∨(105°C)
∨(105°C)
    Electronic & Powerstage
∨(70°C)
∨(70°C)
    BTS-3
∨(50°C)
∨(50°C)
Humidity
0~95% (non condensing)
0~95% (non condensing)
Power control Function
∨
∨
Power assist Function
∨
∨
Uninterrupted AC power
∨(less than 10 msec)
∨(less than 10 msec)
Adaptive 4-stage charge
∨
∨
Two output to charge 2 battery banks
∨
∨
Auxiliary Relay
X 3
X 3
Battery voltage sensor
∨
∨
Battery Temperature sensor (BTS-3)
∨
∨
Remote control port
∨
∨
INVERTER
Input Voltage Range (VDC)
9.5~16V / 19~32V
Output Voltage (VAC)
185~240 VAC
Output Frequency
50Hz  ± 0.1%
Output Waveform
Pure sinewave
Output Voltage THD
< 5%
Power Factor (All Loads)
∨
No linger load, crest factor
3 : 1

Cont. Power Output (W)
Under 70°C (cosθ=1.0)
1500W
(No derate)
3000W
(No derate)
Cont. Power Output (W)
Over 70°C (cosθ=1.0)
0W
(Shutdown)
0W
(Shutdown)
Maximum Power (W)
3000W
6000W
Maximum Efficiency (%)
82/84
84/86
Zero-load Power (W)
12W
18W
CHARGER
Input Voltage Range (VAC)
200~250 VAC
Input Frequency
45-55Hz
Power Factor
1
Charge Characteristic
4-stage adaptive / Bulk-Absorption-Float-Equalize
Maximum DC Voltage Ripple (Vrms)
< 1.25 V
Charge Current House Battery (A)
70A/40A
140A/70A
Charge Current Starter Battery (A)
4A
Absorption Voltage Default (VDC)
14.4V / 28.8V
Float voltage Default (VDC)
13.8V / 27.6V
Equalize Voltage default (VDC)
13.2V / 26.4V
Output Charge Voltage (min ~ max)
8V~16V / 11V~32V
Battery Temperature sensor
BTS-3
SOLAR CHARGE
System voltage ratings
12, 24 Vdc
Current ratings-Battery Charge Control
40A
Accuracy
12/24V:≤0.1 % ± 50 mV
Min. voltage to operate
9V
Max. solar array Voc
140V
Max. operating voltage
68V
Total current consumption
While operating -25mA, at idle -3mA
High temp shutdown
90°C disconnect solar
70°C reconnect solar
Transient surge protection
  pulse power rating
4500 watts
  Response
< 5 nanosec
ENVIRONMENTAL
Ambient temperature
-40 to +45°C
Storage temperature
-55 to +85°C
Humidity
100% (NC)
AC INPUT SWITCH
AC IN Terminal Circuit Breaker
15A (220V)
30A (220V)
Switch-over Time  
  a. inverter to AC input
0 msec.
  b. AC input to inverter
0 msec.
Detection Time AC Input Fault
4 ~10 msec.
Trip Level AC Input to Inverter
180 VAC
Trip Level Inverter to AC Input
187 VAC
Min.~ Max. Frequency Range
55-65 Hz
MECHANICAL
Cabinet / Protection Class
Aluminium / IP20
Dimension (H X W X D)
Wall: 298 x 256 x 368
Table: 189 x 285 x 494
(mm)
Wall: 355 x 256 x 368
Table: 189 x 285 x 708
(mm)
Weight (kgs)
30 kgs
35 kgs


Pure Sinewave
  Stackable Inverter/Charger
SI series
 PM SI series

 






PM1500SI-12
1500 watt 12VDC
with 20 amp charger




PM3000SI-24
  3000watt 24VDC
with 70 amp charger


              
Stackable Inverter
 
Pure Sine Wave Inverter with AC Charger and Solar Charger (Option) + one more design [stackable function].
You may parallel SI Series, according to your requirements.

Features:-
  • More inverters stackable
  • 3 Phase connectable
  • Uninterrupted AC power (UPS function)
  • Power Control - Dealing with limited generator or shore side power
  • Power Assist - Boosting the capacity of shore or generator power
  • LCD display for parameter setting and error messages
  • Programming auxiliary relay (x 3)


Battery Charger:-
  • Adaptive 4-stage charge characteristic: Bulk-Absorption-Float-Equalize
  • The right amount of charge: Variable Absorption Time
  • Preventing damage due to excessive gassing: The Battery Safe Mode
  • Less maintenance and aging when the battery is not in use: The Equalize Mode
  • 2 outputs to charge 2 battery banks
  • To increase battery life: Temperature Compensation
  • Battery Voltage Sense
PM SI series Front Panel                                                  PM SI series Back Panel                                                          PM SI series Remote     
                                                                               
        PM SI front panel                                                        PM SI series back panel                                                        PM SI remote

 

  MODEL 

PM-1500SI-12

 PM-3000SI-24

  INVERTER

  Input Voltage Range (VDC)

9.5~16VDC

 19~32VDC

  Output Voltage (VAC)

185~240VAC

  Output Frequency

50Hz / 60Hz ± 0.1%

  Output Voltage

Pure sinewave

  THD

< 5%

  Power Factor

All loads

  Switch-on Behavior

Nominal output voltage within 20 msec.

  Cont. Output Power at 25°C(W) (cos£c=1.0)

1500W

 3000W

  Cont. Output Power at 40°C(W) (cos£c=1.0)

1200W

 2400W

  Maximum Power (W)

3000W

 6000W

  Maximum Efficiency (%)

88

 92

  Zero-load Power (W)

12W

 18W

  CHARGER

  Input Voltage Range (VAC)

200~250VAC

  Input Frequency

45~55Hz

  Power Factor

1

  Charge Characteristic

4-stage adaptive

  Maximum DC Voltage Ripple (Vrms)

< 1.25 V

  Charge Voltage "Absorption" (VDC)

14.4V

 28.8V

  Charge Voltage "Float" (VDC)

      13.8V       

27.6V

  Output Charge "Voltage" (VDC) Min.,Max.

8V, 16V   

11V, 32V

  Charge Current House Battery (A)

20A

 70A

  Charge Current Starter Battery (A)

4A
  AC Input Switch

  Protected by Thermal Circuit Breaker

16A

 30A

  Switch-over Time Inverter to AC Input

0 msec.

  Switch-over Time AC Input to Inverter

0 msec.

  Detection Time AC Input Fault

4 msec. to 20 msec.

  Trip Level Mains to Inverter

180VAC

  Trip Level Inverter to Mains

187VAC

  Min.- Max. Frequency Range (50Hz/60Hz)

45~55Hz or 55~65Hz

  GENERAL

  Power Control

Yes

  Power Assist

10A

 20A

  Auto Transfer Switch (A)

16A

 30A

  Multi-purpose Relay

3 relays

  Protection

Output short circuit, Overload,
Battery overvoltage, 
Battery undervoltage,
Battery reverse polarity detection,
  Over temperature,
High input voltage ripple

  Common Characteristics

Operating temperature range: -20°C to +50°C
(fan assisted cooling) Humidity: max 95% (non condensing)

  Weight (kg)

15kgs

 28kgs

  Dimensions (L x W x H) mm

380 x 285 x 185 mm

 550 x 285 x 185 mm

  OPTIONS

  Solar Charger

SCC Series PM-SCC-45A-1248 / PM-SCC-60A-1248
(Max. 10 sets for parallel connection)

  Remote Controller

Remote monitoring available, optional cables: 3M/15M

  Battery Temperature Sensor (BTS)

Compensation for the battery charging voltage and current


Home Products
 Prices
 Frequently Asked Questions
 Contact Us
 SunPowerPlus Webpage
 SunPowerPlus TradeMe Site

updated May 2010